dmesg - NVIDIA GeForce RTX 2070 with Max-Q Design

Return To NVIDIA GeForce RTX 2070 with Max-Q Design System Information

Linux version 5.4.0-7634-generic (buildd@lcy01-amd64-008) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #38~1595345317~20.04~a8480ad-Ubuntu SMP Wed Jul 22 15:13:45 UTC  (Ubuntu 5.4.0-7634.38~1595345317~20.04~a8480ad-generic 5.4.41)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000994adfff] usable
BIOS-e820: [mem 0x00000000994ae000-0x00000000995f1fff] reserved
BIOS-e820: [mem 0x00000000995f2000-0x00000000995fcfff] usable
BIOS-e820: [mem 0x00000000995fd000-0x00000000995fdfff] ACPI data
BIOS-e820: [mem 0x00000000995fe000-0x0000000099a3ffff] usable
BIOS-e820: [mem 0x0000000099a40000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fc000000-0x00000000fc000fff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed83fff] reserved
BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000105e7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x982e5018-0x982f4257] usable ==> usable
e820: update [mem 0x982e5018-0x982f4257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000001000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000982e5017] usable
reserve setup_data: [mem 0x00000000982e5018-0x00000000982f4257] usable
reserve setup_data: [mem 0x00000000982f4258-0x00000000994adfff] usable
reserve setup_data: [mem 0x00000000994ae000-0x00000000995f1fff] reserved
reserve setup_data: [mem 0x00000000995f2000-0x00000000995fcfff] usable
reserve setup_data: [mem 0x00000000995fd000-0x00000000995fdfff] ACPI data
reserve setup_data: [mem 0x00000000995fe000-0x0000000099a3ffff] usable
reserve setup_data: [mem 0x0000000099a40000-0x000000009f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fc000000-0x00000000fc000fff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved
reserve setup_data: [mem 0x00000000fed10000-0x00000000fed17fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed83fff] reserved
reserve setup_data: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
reserve setup_data: [mem 0x00000000feda0000-0x00000000feda1fff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000105e7fffff] usable
efi: EFI v2.70 by EDK II
efi:  ACPI 2.0=0x99a52000  SMBIOS=0x99a40000 
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: System76 Oryx Pro/Oryx Pro, BIOS 2020-07-06_f5d3306 07/02/2020
tsc: Detected 2300.000 MHz processor
tsc: Detected 2299.968 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x105e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 009B000000 mask 7FFF000000 uncachable
  1 base 009C000000 mask 7FFC000000 uncachable
  2 base 00A0000000 mask 7FE0000000 uncachable
  3 base 00C0000000 mask 7FC0000000 uncachable
  4 base 1060000000 mask 7FE0000000 uncachable
  5 base 1080000000 mask 7FF0000000 uncachable
  6 base 1090000000 mask 7FFE000000 uncachable
  7 base 1092000000 mask 7FFFF00000 uncachable
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x99a40 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0xa3b801000, 0xa3b801fff] PGTABLE
BRK [0xa3b802000, 0xa3b802fff] PGTABLE
BRK [0xa3b803000, 0xa3b803fff] PGTABLE
BRK [0xa3b804000, 0xa3b804fff] PGTABLE
BRK [0xa3b805000, 0xa3b805fff] PGTABLE
BRK [0xa3b806000, 0xa3b806fff] PGTABLE
BRK [0xa3b807000, 0xa3b807fff] PGTABLE
BRK [0xa3b808000, 0xa3b808fff] PGTABLE
BRK [0xa3b809000, 0xa3b809fff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x7af7c000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000099A52000 000024 (v02 COREv4)
ACPI: XSDT 0x00000000995FDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: FACP 0x0000000099A55CE0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: DSDT 0x0000000099A52280 003A53 (v02 COREv4 COREBOOT 20110725 INTL 20200110)
ACPI: FACS 0x0000000099A52240 000040
ACPI: FACS 0x0000000099A52240 000040
ACPI: SSDT 0x0000000099A55E00 002695 (v02 COREv4 COREBOOT 0000002A CORE 20200110)
ACPI: MCFG 0x0000000099A584A0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: TPM2 0x0000000099A584E0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: APIC 0x0000000099A58530 0000CC (v03 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: DMAR 0x0000000099A58600 000088 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: HPET 0x0000000099A58690 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
ACPI: BGRT 0x00000000995FD018 000038 (v00 INTEL      EDK2 00001720 PTL  00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000105e7fffff]
NODE_DATA(0) allocated [mem 0x105e7d5000-0x105e7fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000105e7fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x00000000994adfff]
  node   0: [mem 0x00000000995f2000-0x00000000995fcfff]
  node   0: [mem 0x00000000995fe000-0x0000000099a3ffff]
  node   0: [mem 0x0000000100000000-0x000000105e7fffff]
Zeroed struct page in unavailable ranges: 32614 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000105e7fffff]
On node 0 totalpages: 16744602
  DMA zone: 64 pages used for memmap
  DMA zone: 1063 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 9764 pages used for memmap
  DMA32 zone: 624891 pages, LIFO batch:63
  Normal zone: 251808 pages used for memmap
  Normal zone: 16115712 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0x98340000-0x9838efff] usable ==> reserved
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x982e5000-0x982e5fff]
PM: Registered nosave memory: [mem 0x982f4000-0x982f4fff]
PM: Registered nosave memory: [mem 0x98340000-0x9838efff]
PM: Registered nosave memory: [mem 0x994ae000-0x995f1fff]
PM: Registered nosave memory: [mem 0x995fd000-0x995fdfff]
PM: Registered nosave memory: [mem 0x99a40000-0x9f7fffff]
PM: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfc000fff]
PM: Registered nosave memory: [mem 0xfc001000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe00ffff]
PM: Registered nosave memory: [mem 0xfe010000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
PM: Registered nosave memory: [mem 0xfed92000-0xfed9ffff]
PM: Registered nosave memory: [mem 0xfeda0000-0xfeda1fff]
PM: Registered nosave memory: [mem 0xfeda2000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Built 1 zonelists, mobility grouping on.  Total pages: 16481903
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65621784K/66978408K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 1356624K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 44480 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-10875H CPU @ 2.30GHz (family: 0x6, model: 0xa5, stepping: 0x2)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (73598.97 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:41:51, date: 2020-08-04
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1596570111.048:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 1 GPEs in block 00 to 7F
ACPI: Power Resource [PWRR] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x105e800000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed47fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:9b44] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:9bc4] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0x9fc10000-0x9fc17fff 64bit]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x9fc24000-0x9fc24fff 64bit]
pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0x9fc25000-0x9fc25fff 64bit]
pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x9fc00000-0x9fc0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x9fc20000-0x9fc21fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x9fc26000-0x9fc26fff 64bit]
pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0x9fc18000-0x9fc1bfff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:06e8] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x9fc27000-0x9fc27fff 64bit]
pci 0000:00:17.0: [8086:06d3] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0x9fc22000-0x9fc23fff]
pci 0000:00:17.0: reg 0x14: [mem 0x9fc2a000-0x9fc2a0ff]
pci 0000:00:17.0: reg 0x18: [io  0x1060-0x1067]
pci 0000:00:17.0: reg 0x1c: [io  0x1068-0x106b]
pci 0000:00:17.0: reg 0x20: [io  0x1040-0x105f]
pci 0000:00:17.0: reg 0x24: [mem 0x9fc29000-0x9fc297ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:06c0] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1b.4: [8086:06ac] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:06b5] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.6: [8086:06b6] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:068d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x9fc1c000-0x9fc1ffff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x9fb00000-0x9fbfffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x9fc2b000-0x9fc2b0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1f14] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xb0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x1060000000-0x106fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x1070000000-0x1071ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xb1000000-0xb107ffff pref]
pci 0000:01:00.0: Max Payload Size set to 128 (was 256, max 256)
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xb1080000-0xb1083fff]
pci 0000:01:00.1: Max Payload Size set to 128 (was 256, max 256)
pci 0000:01:00.2: [10de:1ada] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0x1072000000-0x107203ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0x1072040000-0x107204ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: [10de:1adb] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xb1084000-0xb1084fff]
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xb10fffff]
pci 0000:00:01.0:   bridge window [mem 0x1060000000-0x10720fffff 64bit pref]
pci 0000:02:00.0: [8086:15e7] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PTM enabled, 4ns granularity
pci 0000:00:1b.0: PCI bridge to [bus 02-26]
pci 0000:00:1b.0:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1b.0:   bridge window [mem 0xb3000000-0xb51fffff]
pci 0000:00:1b.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:03:00.0: [8086:15e7] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: [8086:15e7] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:02.0: [8086:15e7] type 01 class 0x060400
pci 0000:03:02.0: enabling Extended Tags
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-26]
pci 0000:02:00.0:   bridge window [io  0x2000-0x3fff]
pci 0000:02:00.0:   bridge window [mem 0xb3000000-0xb51fffff]
pci 0000:02:00.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:04:00.0: [8086:15e8] type 00 class 0x088000
pci 0000:04:00.0: reg 0x10: [mem 0xb5000000-0xb503ffff]
pci 0000:04:00.0: reg 0x14: [mem 0xb5040000-0xb5040fff]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0:   bridge window [mem 0xb5000000-0xb50fffff]
pci 0000:03:01.0: PCI bridge to [bus 05-25]
pci 0000:03:01.0:   bridge window [io  0x2000-0x3fff]
pci 0000:03:01.0:   bridge window [mem 0xb3000000-0xb4ffffff]
pci 0000:03:01.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:26:00.0: [8086:15e9] type 00 class 0x0c0330
pci 0000:26:00.0: reg 0x10: [mem 0xb5100000-0xb510ffff]
pci 0000:26:00.0: enabling Extended Tags
pci 0000:26:00.0: supports D1 D2
pci 0000:26:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:26:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
pci 0000:03:02.0: PCI bridge to [bus 26]
pci 0000:03:02.0:   bridge window [mem 0xb5100000-0xb51fffff]
pci 0000:27:00.0: [1987:5012] type 00 class 0x010802
pci 0000:27:00.0: reg 0x10: [mem 0x9f800000-0x9f803fff 64bit]
pci 0000:00:1b.4: PCI bridge to [bus 27]
pci 0000:00:1b.4:   bridge window [mem 0x9f800000-0x9f8fffff]
pci 0000:28:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:28:00.0: reg 0x10: [io  0x5000-0x50ff]
pci 0000:28:00.0: reg 0x18: [mem 0x9f904000-0x9f904fff 64bit]
pci 0000:28:00.0: reg 0x20: [mem 0x9f900000-0x9f903fff 64bit]
pci 0000:28:00.0: supports D1 D2
pci 0000:28:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.0: PCI bridge to [bus 28]
pci 0000:00:1d.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1d.0:   bridge window [mem 0x9f900000-0x9f9fffff]
pci 0000:29:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:29:00.0: reg 0x14: [mem 0x9fa00000-0x9fa00fff]
pci 0000:29:00.0: supports D1 D2
pci 0000:29:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1d.6: PCI bridge to [bus 29]
pci 0000:00:1d.6:   bridge window [mem 0x9fa00000-0x9fafffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x982e5018-0x9bffffff]
e820: reserve RAM buffer [mem 0x98340000-0x9bffffff]
e820: reserve RAM buffer [mem 0x994ae000-0x9bffffff]
e820: reserve RAM buffer [mem 0x995fd000-0x9bffffff]
e820: reserve RAM buffer [mem 0x99a40000-0x9bffffff]
e820: reserve RAM buffer [mem 0x105e800000-0x105fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xff000000-0xffffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:02: [io  0x1800-0x18fe] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xb10fffff]
pci 0000:00:01.0:   bridge window [mem 0x1060000000-0x10720fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0:   bridge window [mem 0xb5000000-0xb50fffff]
pci 0000:03:01.0: PCI bridge to [bus 05-25]
pci 0000:03:01.0:   bridge window [io  0x2000-0x3fff]
pci 0000:03:01.0:   bridge window [mem 0xb3000000-0xb4ffffff]
pci 0000:03:01.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 26]
pci 0000:03:02.0:   bridge window [mem 0xb5100000-0xb51fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-26]
pci 0000:02:00.0:   bridge window [io  0x2000-0x3fff]
pci 0000:02:00.0:   bridge window [mem 0xb3000000-0xb51fffff]
pci 0000:02:00.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02-26]
pci 0000:00:1b.0:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1b.0:   bridge window [mem 0xb3000000-0xb51fffff]
pci 0000:00:1b.0:   bridge window [mem 0x1072100000-0x10920fffff 64bit pref]
pci 0000:00:1b.4: PCI bridge to [bus 27]
pci 0000:00:1b.4:   bridge window [mem 0x9f800000-0x9f8fffff]
pci 0000:00:1d.0: PCI bridge to [bus 28]
pci 0000:00:1d.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1d.0:   bridge window [mem 0x9f900000-0x9f9fffff]
pci 0000:00:1d.6: PCI bridge to [bus 29]
pci 0000:00:1d.6:   bridge window [mem 0x9fa00000-0x9fafffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0x105e800000-0x7fffffffff window]
pci_bus 0000:00: resource 22 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: resource 23 [mem 0xfed40000-0xfed47fff window]
pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xb0000000-0xb10fffff]
pci_bus 0000:01: resource 2 [mem 0x1060000000-0x10720fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xb3000000-0xb51fffff]
pci_bus 0000:02: resource 2 [mem 0x1072100000-0x10920fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xb3000000-0xb51fffff]
pci_bus 0000:03: resource 2 [mem 0x1072100000-0x10920fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xb5000000-0xb50fffff]
pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xb3000000-0xb4ffffff]
pci_bus 0000:05: resource 2 [mem 0x1072100000-0x10920fffff 64bit pref]
pci_bus 0000:26: resource 1 [mem 0xb5100000-0xb51fffff]
pci_bus 0000:27: resource 1 [mem 0x9f800000-0x9f8fffff]
pci_bus 0000:28: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:28: resource 1 [mem 0x9f900000-0x9f9fffff]
pci_bus 0000:29: resource 1 [mem 0x9fa00000-0x9fafffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
pci 0000:00:1b.0: can't derive routing for PCI INT A
pci 0000:00:1b.0: PCI INT A: no GSI - using ISA IRQ 11
pci 0000:00:1b.0: can't derive routing for PCI INT A
pci 0000:02:00.0: PCI INT A: no GSI - using ISA IRQ 11
pci 0000:00:1b.0: can't derive routing for PCI INT A
pci 0000:03:02.0: PCI INT A: no GSI - using ISA IRQ 11
pci 0000:00:1b.0: can't derive routing for PCI INT A
pci 0000:26:00.0: PCI INT A: no GSI - using ISA IRQ 11
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 82444K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x91a40000-0x95a40000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1b.0: PME: Signaling with IRQ 123
pcieport 0000:00:1b.0: pciehp: Slot #16 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pcieport 0000:00:1b.4: can't derive routing for PCI INT A
pcieport 0000:00:1b.4: PCI INT A: no GSI - using ISA IRQ 11
pcieport 0000:00:1b.4: PME: Signaling with IRQ 124
pcieport 0000:00:1d.0: PME: Signaling with IRQ 125
pcieport 0000:00:1d.6: PME: Signaling with IRQ 126
pcieport 0000:00:1b.0: can't derive routing for PCI INT A
pcieport 0000:03:00.0: PCI INT A: no GSI - using ISA IRQ 11
pcieport 0000:00:1b.0: can't derive routing for PCI INT A
pcieport 0000:03:01.0: PCI INT A: no GSI - using ISA IRQ 11
pcieport 0000:03:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 165
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb3: SerialNumber: 0000:01:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb4: SerialNumber: 0000:01:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
pcieport 0000:00:1b.0: can't derive routing for PCI INT A
xhci_hcd 0000:26:00.0: PCI INT A: no GSI - using ISA IRQ 11
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:26:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb5: SerialNumber: 0000:26:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:26:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb6: SerialNumber: 0000:26:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core intel_pmc_core.0:  initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0xa0652, pf=0x20, revision=0xc8
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1512747561, 8443008)->(1530587773, -9397204)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 03d923fa1f9f23ca919e9b759ff1bfe2473b2746'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 0:461:697
platform INT33D5:00: hash matches
acpi LNXCPU:0b: hash matches
acpi INT33D5:00: hash matches
memory memory423: hash matches
rtc_cmos 00:03: setting system clock to 2020-08-04T19:41:52 UTC (1596570112)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
system76_acpi: loading out-of-tree module taints kernel.
system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
pcieport 0000:00:1b.0: can't derive routing for PCI INT A
thunderbolt 0000:04:00.0: PCI INT A: no GSI - using ISA IRQ 11
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
scsi host0: ahci
scsi host1: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0x9fc29000 port 0x9fc29180 irq 134
idma64 idma64.0: Found Intel integrated DMA 64-bit
i2c_hid i2c-PNP0C50:00: i2c-PNP0C50:00 supply vdd not found, using dummy regulator
i2c_hid i2c-PNP0C50:00: i2c-PNP0C50:00 supply vddl not found, using dummy regulator
cryptd: max_cpu_qlen set to 1000
nvme nvme0: pci function 0000:27:00.0
pcieport 0000:00:1b.4: can't derive routing for PCI INT A
nvme 0000:27:00.0: PCI INT A: no GSI - using ISA IRQ 11
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
libphy: r8169: probed
r8169 0000:28:00.0 eth0: RTL8168h/8111h, 80:fa:5b:83:1f:01, XID 541, IRQ 152
r8169 0000:28:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
system76: Model System76 oryp6 found
system76: No known WMI event notification GUID found
r8169 0000:28:00.0 enp40s0: renamed from eth0
checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:40: registered as cooling_device16
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
usb 1-3: new high-speed USB device number 2 using xhci_hcd
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 8/0/0 default/read/poll queues
 nvme0n1: p1 p2
tsc: Refined TSC clocksource calibration: 2303.994 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f221db9, max_idle_ns: 440795284235 ns
clocksource: Switched to clocksource tsc
usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB2.1 Hub
usb 1-3: Manufacturer: GenesysLogic
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: WDC WDS240G2G0B-00EPW0, UJ400400, max UDMA/133
ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WDS240G2G0B- 0400 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-3: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB3.1 Hub
usb 2-3: Manufacturer: GenesysLogic
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 1-8: new high-speed USB device number 3 using xhci_hcd
usb 1-8: New USB device found, idVendor=5986, idProduct=9102, bcdDevice= 6.01
usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-8: Product: BisonCam,NB Pro
usb 1-8: Manufacturer: Sonix Technology Co., Ltd.
usb 1-3.3: new full-speed USB device number 4 using xhci_hcd
usb 1-3.3: New USB device found, idVendor=1a7c, idProduct=0197, bcdDevice= 1.06
usb 1-3.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-3.3: Product: Evoluent VerticalMouse D
usb 1-3.3: Manufacturer: Kingsis Peripherals
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Kingsis Peripherals Evoluent VerticalMouse D as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1A7C:0197.0001/input/input8
hid-generic 0003:1A7C:0197.0001: input,hidraw0: USB HID v1.11 Mouse [Kingsis Peripherals Evoluent VerticalMouse D] on usb-0000:00:14.0-3.3/input0
usb 1-14: new full-speed USB device number 5 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.4: new full-speed USB device number 6 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=29ea, idProduct=0102, bcdDevice= 1.00
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Freestyle Edge Keyboard
usb 1-3.4: Manufacturer: Kinesis
usb 1-3.4: SerialNumber: 223606797749
input: Kinesis Freestyle Edge Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:29EA:0102.0002/input/input9
hid-generic 0003:29EA:0102.0002: input,hidraw1: USB HID v1.11 Mouse [Kinesis Freestyle Edge Keyboard] on usb-0000:00:14.0-3.4/input0
input: Kinesis Freestyle Edge Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.1/0003:29EA:0102.0003/input/input10
hid-generic 0003:29EA:0102.0003: input,hidraw2: USB HID v1.11 Keyboard [Kinesis Freestyle Edge Keyboard] on usb-0000:00:14.0-3.4/input1
input: Kinesis Freestyle Edge Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:29EA:0102.0004/input/input11
input: Kinesis Freestyle Edge Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:29EA:0102.0004/input/input12
hid-generic 0003:29EA:0102.0004: input,hidraw3: USB HID v1.11 Device [Kinesis Freestyle Edge Keyboard] on usb-0000:00:14.0-3.4/input2
i2c_hid i2c-PNP0C50:00: failed to reset device.
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
input: PNP0C50:00 06CB:CE25 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CE25.0005/input/input13
input: PNP0C50:00 06CB:CE25 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CE25.0005/input/input14
hid-generic 0018:06CB:CE25.0005: input,hidraw4: I2C HID v1.00 Mouse [PNP0C50:00 06CB:CE25] on i2c-PNP0C50:00
system76: Model System76 oryp6 found
system76: No known WMI event notification GUID found
usbcore: registered new interface driver system76-io
raid6: avx2x4   gen() 44074 MB/s
raid6: avx2x4   xor() 28704 MB/s
raid6: avx2x2   gen() 39712 MB/s
raid6: avx2x2   xor() 26341 MB/s
raid6: avx2x1   gen() 34279 MB/s
raid6: avx2x1   xor() 24039 MB/s
raid6: sse2x4   gen() 18459 MB/s
raid6: sse2x4   xor() 12405 MB/s
raid6: sse2x2   gen() 16626 MB/s
raid6: sse2x2   xor() 11340 MB/s
raid6: sse2x1   gen() 14774 MB/s
raid6: sse2x1   xor()  8625 MB/s
raid6: using algorithm avx2x4 gen() 44074 MB/s
raid6: .... xor() 28704 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
async_tx: api initialized (async)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Successfully credited entropy passed from boot loader.
systemd[1]: systemd 245.4-4ubuntu3.2pop1~1596049172~20.04~c9d8f2b running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started Journal Service.
systemd-journald[547]: Received client request to flush runtime journal.
input: Intel HID events as /devices/platform/INT33D5:00/input/input16
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
system76: Model System76 oryp6 found
system76: No known WMI event notification GUID found
IPMI message handler: version 39.2
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
ipmi device interface
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mc: Linux media interface: v0.10
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-50.ucode failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-49.ucode failed with error -2
input: PNP0C50:00 06CB:CE25 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CE25.0005/input/input17
input: PNP0C50:00 06CB:CE25 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CE25.0005/input/input18
hid-multitouch 0018:06CB:CE25.0005: input,hidraw4: I2C HID v1.00 Mouse [PNP0C50:00 06CB:CE25] on i2c-PNP0C50:00
nvidia-nvlink: Nvlink Core is being initialized, major device number 235
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
videodev: Linux video capture interface: v2.00
iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17
iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Found debug configuration: 0
iwlwifi 0000:00:14.3: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm
uvcvideo: Found UVC 1.00 device BisonCam,NB Pro (5986:9102)
uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: BisonCam,NB Pro: BisonCam,NB Pr as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.100  Fri May 29 08:45:51 UTC 2020
iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.100  Fri May 29 08:14:04 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
iwlwifi 0000:00:14.3: base HW address: 34:7d:f6:15:be:e0
thermal thermal_zone2: failed to read out thermal zone (-61)
iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
audit: type=1400 audit(1596570121.376:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=968 comm="apparmor_parser"
audit: type=1400 audit(1596570121.376:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=975 comm="apparmor_parser"
audit: type=1400 audit(1596570121.380:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=970 comm="apparmor_parser"
audit: type=1400 audit(1596570121.380:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=963 comm="apparmor_parser"
audit: type=1400 audit(1596570121.380:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=963 comm="apparmor_parser"
audit: type=1400 audit(1596570121.384:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=974 comm="apparmor_parser"
audit: type=1400 audit(1596570121.384:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=969 comm="apparmor_parser"
audit: type=1400 audit(1596570121.384:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=969 comm="apparmor_parser"
audit: type=1400 audit(1596570121.384:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=969 comm="apparmor_parser"
audit: type=1400 audit(1596570121.384:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=972 comm="apparmor_parser"
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Adding 7513596k swap on /dev/mapper/cryptswap.  Priority:-2 extents:1 across:7513596k SSFS
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
nvidia-uvm: Loaded the UVM driver, major device number 511.
vboxdrv: Found 16 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2303993912 Hz
vboxdrv: Successfully loaded version 6.1.12 (interface 0x002d0001)
ahci 0000:00:17.0: port does not support device sleep
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1475985 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 13626 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
NET: Registered protocol family 38
Generic FE-GE Realtek PHY r8169-2800:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-2800:00, irq=IGNORE)
aufs 5.4.3-20200302
r8169 0000:28:00.0 enp40s0: Link is Down
iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
wlp0s20f3: authenticate with 60:38:e0:ba:e7:52
wlp0s20f3: send auth to 60:38:e0:ba:e7:52 (try 1/3)
wlp0s20f3: authenticated
wlp0s20f3: associate with 60:38:e0:ba:e7:52 (try 1/3)
wlp0s20f3: RX AssocResp from 60:38:e0:ba:e7:52 (capab=0x511 status=0 aid=8)
wlp0s20f3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
r8169 0000:28:00.0 enp40s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp40s0: link becomes ready
kauditd_printk_skb: 17 callbacks suppressed
audit: type=1400 audit(1596570129.260:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1814 comm="apparmor_parser"
rfkill: input handler disabled
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
bpfilter: Loaded bpfilter_umh pid 1937
Started bpfilter
Initializing XFRM netlink socket
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
rfkill: input handler disabled
usb 1-1: new high-speed USB device number 7 using xhci_hcd
usb 1-1: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Portable Super Multi Drive
usb 1-1: Manufacturer: Hitachi-LG Data Storage Inc
usb 1-1: SerialNumber: K5IJ8N84753         
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
scsi 2:0:0:0: CD-ROM            ASUS     SDRW-08D2S-U     A801 PQ: 0 ANSI: 0
sr 2:0:0:0: Power-on or device reset occurred
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 3c 5e 80 00 00 3c 00 00 00
blk_update_request: I/O error, dev sr0, sector 15825408 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 3c 5e bc 00 00 04 00 00 00
blk_update_request: I/O error, dev sr0, sector 15825648 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 3c 5e 80 00 00 02 00 00 00
blk_update_request: I/O error, dev sr0, sector 15825408 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3956352, async page read
Buffer I/O error on dev sr0, logical block 3956353, async page read
UDF-fs: INFO Mounting volume 'TRANSFORMERS_VANILLA', timestamp 2007/08/24 03:34 (1000)
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 3c 5f 80 00 00 02 00 00 00
blk_update_request: I/O error, dev sr0, sector 15826432 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 02 7d 94 00 00 08 00 00 00
blk_update_request: I/O error, dev sr0, sector 652880 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 02 7d 94 00 00 01 00 00 00
blk_update_request: I/O error, dev sr0, sector 652880 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sr0, logical block 163220, async page read
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 02 7d 94 00 00 01 00 00 00
blk_update_request: I/O error, dev sr0, sector 652880 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sr0, logical block 163220, async page read
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 02 7d 94 00 00 01 00 00 00
blk_update_request: I/O error, dev sr0, sector 652880 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sr0, logical block 163220, async page read
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 03 2c fa 00 00 02 00 00 00
blk_update_request: I/O error, dev sr0, sector 832488 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 208122, async page read
Buffer I/O error on dev sr0, logical block 208123, async page read
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 03 2c fa 00 00 01 00 00 00
blk_update_request: I/O error, dev sr0, sector 832488 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sr0, logical block 208122, async page read
sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current] 
sr 2:0:0:0: [sr0] tag#0 Add. Sense: Read of scrambled sector without authentication
sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 03 2c fa 00 00 01 00 00 00
blk_update_request: I/O error, dev sr0, sector 832488 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sr0, logical block 208122, async page read
VFS: busy inodes on changed media or resized disk sr0

Return To NVIDIA GeForce RTX 2070 with Max-Q Design System Information